LED Light bar | Dual-row

The Autobeam dual-row LED light bar combines a focused driving beam with wider spread from its spot/flood optics, making it suitable for properly installed auxiliary lighting on vans, 4x4s and other vehicles. Four lengths are available, each with its own dimensions, wattage and light output.

Features

• Multi-row spot/flood optics for near and distance illumination
• 6000K white LED light output
• Finned housing to dissipate heat and an IP69 ingress-protection rating
• Operates on 9–30V DC (nominal 12V/24V systems)
• Manufacturer-listed 2-year warranty

Technical specifications

• 8-inch: 211 × 72 × 60mm; 36W, 12 LEDs, 4,704 lumens
• 22-inch: 568 × 72 × 60mm; 120W, 40 LEDs, 15,680 lumens
• 32-inch: 823 × 72 × 60mm; 180W, 60 LEDs, 23,520 lumens
• 42-inch: 1078 × 72 × 60mm; 240W, 80 LEDs, 31,360 lumens
• Cable tail: approximately 300mm; light colour: 6000K white

Choose your variant

• Select the 8, 22, 32 or 42-inch lamp size before ordering.
• NO wiring harness: bar only as stated by Autobeam.
• YES – vehicle full beam: version with the corresponding optional loom.
• YES – switch: version with a loom for separate switched operation.

What's included

• 1 × LED light bar in the selected length
• Optional wiring harness only if chosen using the product options

Installation and compatibility

Use a firm mounting point, suitable bracketry and a correctly protected electrical feed. Large versions draw considerably more power. Check the selected harness current limit before combining it with 120W, 180W or 240W bars; use an appropriately rated alternative circuit where required. Ensure aiming and activation comply with road-vehicle lighting rules.

Important information

Manufacturer lumens are listed supplier figures, not independently measured performance. Vented light assemblies may produce a temporary fine internal mist as ambient temperature changes.

For advice on vehicle suitability and professional installation, contact D.Y Fleet Installations.