LED Sequential indicator | Ford Transit MK8

Features

• Advanced sequential technology
  
• Uniform distribution of light
  
• Long-Lasting/High Quality
  
• Plug & Play installation 
  
• Direct replacement 
  
• Error Free
  
• Low power consumption
  
• High lumen output

Installation

• Remove the blind-spot mirror
  Pull the inner edge of the mirror glass towards the outer side of the vehicle.
  With fingers behind the glass, gently pull until the mirror detaches.

• Remove the main mirror glass
  Push the inner edge fully inwards, place fingers behind the outer edge, and carefully pull until the mirror releases.

• Remove the original indicator lens
  Undo the two T10 Torx screws and remove the indicator lens from the mirror housing.

• Remove the bulb holder
  Twist and remove the bulb holder from the original indicator and remove the bulb.

• Connect the new Autobeam indicator (bulb-dependent)

  • W5W bulb: Plug the new indicator directly into the original vehicle plug

  • W16W bulb: Use the supplied extension lead between the vehicle plug and the new indicator

• Seal the indicator
  Push the rubber bung into the rear of the new indicator lens to prevent water ingress.

• Test before refitting
  Test the indicator operation before reinstalling the lens and mirror glass.

Specification

Voltage: 12v
Light colour: Amber
Lens type: Smoked | Clear

Fitment

Ford Transit MK8.0 (2014-2020)
Ford Transit MK8.5 (2020-2025)

What's in the box 

2x LED Sequential Indicator Units

Warranty 

3 Years

If purchased outside the UK warranty is limited to 12 Months.

Other Information

Condensation may occur which is perfectly normal - These units have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.

Models may vary, ensure fitment is correct for the vehicle before purchase. Packaging type may vary depending on stock and shipping restrictions.